How To Measure For A Snowmobile Cover With Ease

The crucial measurements required for determining the correct size of your snowmobile cover are as follows:

1. Length
2. Width
3. Height

A reliable measuring tape is necessary for this task. Obtaining precise measurements ensures you have the accurate dimensions of your snowmobile. Any inaccuracies may result in ordering a cover that either leaves parts of your snowmobile exposed or hangs excessively at the edges.

It's important to note that when you order from us, there's no need to worry about measuring first. We maintain a comprehensive database with the dimensions of every snowmobile make and model, so you can simply provide us with your snowmobile's details, and we'll supply the perfect cover.

Length Measurement

The first measurement you will need to collect for your snowmobile is its length. Positioning is key in how to measure a snowmobile for a cover, so try to place your snowmobile on a flat, level surface.

1. Measure front to rear, starting at the tip of the skis right to the very back of the snowmobile.
2. Make sure you include any permanently-mounted attachments like a rear rack or hitch.
3. Remember that even the smallest discrepancies in this measurement can affect the fit of the cover, so aim for total accuracy.
4. Double-check your measurements before proceeding to measure the width.

The best vehicle covers for snow, rain, indoor storage, and other uses all offer outstanding protection against the elements. But the fit is crucial, so your measurements are all-important.

Width Measurement

Once you have recorded the length measurement, you are ready to measure the width. Again, accuracy is everything, so pursue the following steps:

1. Find the widest part of the snowmobile and measure from one side to the other.
2. If any permanently-mounted accessories extend the width, make sure you incorporate them into your measurement.
3. Try measuring a few different points of the snowmobile to ensure you get the widest point.
4. Double-check your measurement to ensure you have got accurate figures that truly represent your snowmobile’s size.

Snowmobiles can vary in size and shape depending on their make and model, so it is important to pay close attention when collecting each measurement. The same is true when measuring for ATV covers and every other type of vehicle cover.

Height Measurement

The final measurement you must take in how to measure for a snowmobile cover is the height. All measurements in this process are equally important.

1. Determine the highest point of the snowmobile. This is usually the handlebars or any attachments mounted on them.
2. Use your measuring tape to get a measurement from the ground to this highest point.
3. Try to take this measurement as close to perfectly vertical as you can and double-check your measurement for accuracy.

It’s important that your cover is tall enough to provide complete coverage of your snowmobile once installed. It should extend all the way to the ground for maximum protection, so measure carefully.

As mentioned, snowmobile sizes vary depending on the make and model. Choosing the right cover size is crucial to ensure proper protection and a snug fit that won't be blown off by the wind. Here are some common dimensions for snowmobiles:

• Length: Snowmobiles typically range from 9 to 12 feet in length, although they can be longer.
• Width: This is usually between 42 to 48 inches.
• Height: This dimension varies the most, but snowmobiles are often around 3 to 4 feet from the ground.

These are general suggestions, and it is crucial that you take accurate measurements of your specific snowmobile. When selecting a cover, aim for one that most closely matches the dimensions of your vehicle, choosing the closest size up when the measurements don't match exactly.

Remember that our service doesn't require you to measure your snowmobile. Simply tell us the make, model, and year of your snowmobile, and we will provide you with the ideal cover and a guaranteed fit.

There are several important reasons why knowing how to measure for a snowmobile cover is crucial. Having an ill-fitting cover can lead to the following problems:

• Inadequate protection: A cover that is too small will leave parts of your snowmobile exposed to the elements. If the cover is too big, it could be blown loose by the wind, leaving your vehicle vulnerable.
• Durability: A cover that’s too tight will experience excessive strain during installation, potentially leading to premature wear and tear. Conversely, if it’s too loose, it could be damaged by flapping in the wind.
• Aesthetics: A poor fit looks messy and detracts from the overall appearance of your snowmobile.

Snowmobile covers are a worthwhile investment for the protection they offer. However, getting the optimal size is essential if you want the best possible results.

If you store your snowmobile outdoors, it can be exposed to environmental threats like:

• Snow and ice
• Wind
• Rain
• Intense sunlight
• Dust, dirt, and debris

The material of your snowmobile cover determines the level of protection it offers against these elements. We manufacture our outdoor snowmobile covers from polypropylene because it provides superb all-round protection against these threats while remaining cost-effective.

For indoor protection, your primary concerns should be guarding against dust, humidity, and bumps and scratches. Our lightweight polypropylene is an excellent budget option for this protection, or you could opt for our premium satin indoor cover for a more high-end solution.

These types of protections are essential for snowmobile, motorcycle, and car covers, and we recommend polypropylene as the best all-round material.

A basic snowmobile cover offers protection against a wide range of environmental threats to the appearance and condition of your vehicle. However, not all covers are created equal; many may include additional features that offer specific protections, added security, or provisions to improve visibility. You need to consider your individual needs to determine whether any of these features will be useful to you.

Ventilation Systems To Prevent Condensation

It is always recommended to ensure your snowmobile is dry before installing a cover. When you apply a cover to a wet vehicle, you trap moisture underneath—something that is even more problematic with waterproof covers. This moisture can cause mold and mildew to form, lead to rust on metal parts, and even harm electrical components.

We design our vehicle covers to be breathable, allowing air to circulate underneath and remove condensation. However, some covers take this a step further, with air vents that maximize the airflow underneath. Condensation prevention is crucial, so be sure to consider breathability or ventilation systems when choosing your snowmobile cover.

Elastic Hems For A Snug Fit

We have previously mentioned the benefits of a snug fit, which include:

• Preventing wind penetration.
• Ensuring maximum protection against the elements.
• Maintaining a pleasing aesthetic for your snowmobile.

This is why it’s crucial to know how to measure a snowmobile for a cover. Some covers include features that further improve the fit for your snowmobile.

We supply covers with elastic hems that tighten around the base of the vehicle once installed. They are easy to stretch over the vehicle and will compress tightly at ground level once in place. Not only does this provide a snug, secure fit, but it also simplifies the installation process. Moreover, you can combine elastic hems with other measures to achieve the most secure installation possible.

Tie-Down Systems For Added Security

Many people prefer to use additional tie-down methods to enhance the security of their vehicle cover. Knowing how to measure for a snowmobile cover is crucial to get the correct fit, but other measures can be really helpful once installed. Many covers come with built-in features like:

• Straps and buckles that fasten around the snowmobile.
• Cinch systems that enable you to tighten the cover around the vehicle.
• Quick-release buckles for easy installation and removal.
• Integrated loops or grommets that can be combined with ropes or bungee cords.
• Zipper closures that provide a robust fit around the snowmobile.

These are all additional methods that exist as alternatives or additions to the elastic hem on our covers. It is also possible to purchase external accessories for a secure fit, like cover clamps, tie-down kits, cover locks, and gust straps.

Ultimately, the choice of tie-down system is yours. For long-term storage, particularly in an outdoor environment, you may want to ensure you have the most secure installation possible. Consider your needs and circumstances and use those to inform your decision-making.

Reflective Markings For Visibility

Another useful feature for snowmobile covers is the addition of reflective markings on the outside. The primary purpose of these is to increase the visibility of your snowmobile in the dark. When a light shines on these markings, either from a flashlight or vehicle headlights, that light is reflected back so the cover is clearly visible. This can be beneficial when looking for a covered snowmobile in the dark, or if you are hauling it on a trailer at night.

Another benefit of these reflective markings is that they enhance the aesthetic design of the cover. They can be added in complementary shapes or patterns, or they can display a logo. In any case, they are an extra visual feature on the cover that makes a difference to its appearance. If you are concerned with these types of considerations, then this could be a helpful feature for your snowmobile cover.