How To Put On Motorcycle Cover Quickly And Safely

An uncovered motorcycle is vulnerable to external damage. While age contributes to component degradation, exposed bikes can also incur harm from UV rays, moisture, and cold. To prevent issues like corrosion, cracked seals, and rusted bolts, it's crucial to understand how to put on a motorcycle cover and ensure it's suitable for your requirements. This guide offers the necessary insights for accomplishing this task accurately.

Key Takeaways

  • It’s important to prepare your motorcycle before you apply the cover.
  • The cover method should be done carefully and methodically.
  • It is unwise to put the cover on immediately after riding.
  • The cover should be fairly tight when installed.
  • It’s important to remove the cover carefully when finished.
  • You must order a suitable cover for your motorcycle and maintain it well.

How To Put On A Motorcycle Cover

In this installation guide, we will present a step-by-step process for preparing your motorcycle and correctly covering it for times when it needs to be left outdoors.


Preparation is key to knowing how to put on a motorcycle cover. Without properly prepping both the bike and the cover, your motorcycle may remain vulnerable to damage even when it's covered. Here are the steps for preparation:

  1. Clean and dry the motorcycle: It must be free of dirt and debris that could scratch the paintwork, and also dry to prevent corrosion of mold.
  2. Fold in mirrors and antennas and close all openings: Mirrors and antennas could damage the cover and openings should be closed to avoid dust getting into systems.
  3. Ensure moving parts are lubricated: Exposed metal parts like the chain must be lubricated to ensure they are protected from moisture.
  4. Park in a suitable location: Your bike should be parked on a flat surface away from overhanging trees or any sharp objects.

No matter the duration of motorcycle storage, it's crucial to ensure thorough preparation before covering it. The primary focus should be avoiding the entrapment of debris or moisture beneath the cover and ensuring the protection of all vulnerable parts.

An uncovered motorcycle in the road for how to put on a motorcycle cover

Covering Method (Front To Back Or Vice Versa)

With your motorcycle properly prepared for covering, you're now ready to apply the cover. The following outlines a fundamental method for how to put on a motorcycle cover. However, please note that the approach might differ based on the specific cover you have. We offer a variety of motorcycle covers, so consult the provided instructions for precise guidance.

  1. Unfold the cover and lay it flat, ensuring the front/rear markings are aligned with your motorcycle.
  2. If the cover has an elasticized bottom, pull the front end over the front wheel of the bike. If not, you should simply align it at the front first.
  3. Gently walk the cover over the motorcycle from front to back, ensuring it covers the handlebars, seat, tank and rear section completely.
  4. Tuck it under the wheels at the front and the back and ensure it covers the full depth of the bike at the sides.
  5. Smooth out wrinkles or creases to ensure a clean, snug fit and keep rubbing to a minimum.
  6. Secure the attachments. Our covers come with straps and buckles, and you can also buy tie-downs and other accessories to secure the fit.
  7. Ensure any vents or openings are positioned correctly to facilitate proper ventilation and do a final walk-round of the motorcycle to inspect the fit.

Following all of these steps is essential for learning how to put on a motorcycle cover. By ensuring complete coverage, a snug fit, and secure attachment, you provide your bike with optimal protection against the elements.

Can You Put On A Motorcycle Cover Right After Riding?

It is possible to put on a motorcycle cover immediately after riding. However, it is recommended to wait for a short while before applying the cover. Here are the reasons for that:

  • The bike will be hot: Motorcycle engines and exhausts can become extremely hot, and trapping this heat under the cover could potentially lead to damage to the paintwork or the cover's material.
  • There may be moisture on the bike: While riding, your motorcycle may gather moisture due to humidity or rain. It's advisable to allow this moisture to dry before putting on the cover. You can even use a towel or cloth to dry the areas most affected, if necessary.

It might require 15-30 minutes for the motorcycle to cool down to a temperature suitable for applying the cover. However, the evaporation of moisture might take even longer. It's crucial not to trap moisture under the cover, as it can result in corrosion and the development of mildew.

Our waterproof covers excel in safeguarding against rainfall, yet they can inadvertently trap moisture inside. Alternatively, more breathable cover materials may facilitate the evaporation of moisture from beneath the cover, but they might not provide all-encompassing rain protection for outdoor storage.

Reflect on these considerations attentively as a vital aspect of how to put on a motorcycle cover.

Should Motorcycle Covers Be Tight?

The fit of a motorcycle cover should be snug, but not excessively tight. Too much tension or strain can be harmful to the cover's material, but it still needs to prevent wind from getting underneath. A tight fit will avoid flapping in the wind, yet a small amount of airflow is important to allow for circulation that prevents lingering moisture from becoming trapped.

When you initiate the process of how to put on a motorcycle cover, you shouldn't find it difficult to apply the cover. If it feels strenuous, you might be fitting it too tightly. Strive for a snug, secure fit that doesn't exert any strain on the cover's material itself.

How To Remove Your Motorcycle Cover

It's essential to remove a motorcycle cover correctly to prevent any damage to both the cover and your motorcycle. While we provide covers that are designed for easy installation and removal to simplify this process, it's still important to follow the steps below and consult the instructions provided for your specific product:

  1. Ensure the cover is free from debris.
  2. Undo the attachments and release the elastic bottom if applicable.
  3. Start folding the cover back in sections, either from front to back or vice versa, then fold the sides in as well.
  4. Lift the bundle off and take it away from the bike.
  5. Open it out and shake off any remaining debris. If the cover is wet, it will need to be air dried thoroughly before you fold it.
  6. Fold or roll the cover up carefully, making it compact and safe for storage.

We offer fabric storage bags in which you can safely store your folded cover. This practice can contribute to extending their lifespan, ensuring that you get the maximum value for your investment.

Points To Keep In Mind Before Covering Your Bike

Learn how to put on your motorcycle cover correctly. Incorrect installation risks rendering protection against rain, dust, and UV rays ineffective, leaving exposed areas vulnerable to damage. Additionally, you might trap moisture underneath or subject the cover's material to excessive stress.

Other potential risks include:

  • Scratches and abrasions
  • Wind damage
  • Leaks
  • Unintended movement that leads to exposure of the bike

This guide provides numerous aspects to be mindful of, but always refer to the instructions for your specific motorcycle cover. We offer various sizes, shapes, and materials, each with its own requirements, so be attentive to your bike cover's unique needs.

Choosing The Right Motorcycle Cover

Selecting the appropriate motorcycle cover for your needs entails considering several factors. One crucial consideration involves choosing between a custom or universal cover. Custom covers usually provide a superior fit since they are tailored to your specific bike model, albeit at a higher cost. Universal covers can offer a snug fit as well, but might require a bit more adjustment.

  • Determine whether your motorcycle is a standard, cruiser, sportbike, touring or other style of motorbike, as well sell covers designed to fit different ones.
  • Know your motorcycle's dimensions in order to get the correct size.
  • Think about indoor vs outdoor use.
  • Know the weather conditions in your location.
  • Choose the appropriate material with the necessary durability, breathability, water-resistance and more
  • Our covers all include robust attachment mechanisms, but you can also buy additional ones for a more secure fit.

A snug fit is typically more favorable than a loose one as it effectively envelops your bike's contours and blocks wind entry. However, it's essential to take your bike's requirements and the outdoor storage conditions into account when selecting an appropriate cover for protection. Above all, learn how to put on your motorcycle cover correctly for maximum protection.

Maintenance Of Your Motorcycle Cover

Maintaining your motorcycle cover is essential for ensuring its longevity and effectiveness in safeguarding your bike. Regular cleaning using a soft brush to remove dirt or hand washing for heavier soiling is crucial. Avoid using washing machines and refrain from using harsh chemicals on your motorcycle cover. Furthermore, always air dry the cover, avoiding direct sunlight or heat sources that could potentially damage the fabric.

Correct folding and storage are also significant factors to consider. Keep the cover away from sharp objects and inspect it regularly to ensure it hasn't sustained any damage. Optimal storage locations are cool, dry places away from direct sunlight, as they contribute to preserving your motorcycle cover and shielding it from harm.

Frequently Asked Questions About How To Put On A Motorcycle Cover

After cleaning and drying the motorcycle, align the cover with your bike then hook it under the front wheel. Walk it over to the back, then tuck it underneath on all sides and secure it with the straps.

Leave 15-30 minutes after riding before applying the cover. Your bike should be clean and dry and you should aim for a snug, secure fit to offer maximum protection against damage.

Yes, but not overly tight as this can damage the fabric of the motorcycle cover. Ensure it is tight enough to prevent wind getting underneath but loose enough to allow basic airflow.