How To Clean Jet Ski Cover

There are various methods for cleaning jet ski covers, and the one you choose will depend on several factors, including:

• Personal preference.
• The fabric of your jet ski cover.
• The type of elements the cover is exposed to.

Most covers are machine washable if you follow the care label instructions, but you can also clean them manually or with a pressure washer. When you need to target specific issues, using chemicals like bleach or mold removers may be an option. The most important thing is to always adhere to the manufacturer's guidelines for cleaning.
Our jet ski covers are designed to be durable and resistant to many outdoor elements, but regular cleaning is still necessary. They provide outstanding protection for your jet ski and will continue to do so with the right care and maintenance.

How To Machine Washing Jet Ski Covers

Machine washing is the simplest method for cleaning a jet ski cover. Our covers are machine washable, and we provide comprehensive guidance on how to do it safely. While most covers are suitable for washing machines, those with a central agitator are typically not recommended. Although the specific instructions for machine washing may vary from cover to cover, there are some common rules that apply to most:

• Avoid washing at high temperatures.
• Use only gentle detergents and avoid fabric softeners.
• Steer clear of high spin speeds.
• Do not put it in a tumble dryer.

Always refer to the care label or manufacturer's guidance for specific instructions for your vehicle cover. Please note that disposable covers are not intended to be washed. If you have one, dispose of it responsibly after use.

Manual Cleaning: Using Brush, Hose, And Detergent

It is possible to hand wash your jet ski cover, which can be effective when you don't have access to a washing machine or for covers that are not machine washable. When done correctly, hand washing can be a very effective option. You will need a hose, a brush with soft bristles, a bucket of cool water, and some mild detergent. Here are the steps:

• Open the cover and lay it on a clean, flat patch of ground with the outside facing up. Remove any large pieces of debris and dirt using a dry brush.
• Mix some detergent into the bucket of water, then dip the brush into it. Use the brush to scrub the cover's surface with the detergent, ensuring you remove encrusted dirt and mildew.
• Once you have thoroughly brushed it, rinse away the detergent with the hose. Hanging the cover to let the water run off can be helpful but is not entirely necessary.
• After a full rinse, hang the cover on a washing line and allow it to air dry.

This is how to clean a jet ski cover by hand. You can repeat the process for the inside if necessary, but it is best to try to prevent the underside of your cover from being soiled in the first place. Once your cover is dry, make sure you fold it properly before putting it into storage.

Use A Mold And Mildew Remover On A Jet Ski Cover

There are some mold and mildew removers that are compatible with vehicle covers. You will need to look for chemicals designed specifically for that purpose and check the instructions to see if they are safe for the fabric of your cover. Generally speaking, mold and mildew removers are not a good idea for your cover as they often include chemicals that can be harmful to your material. Some manufacturers will recommend a specific mold and mildew remover for their products.

If you do notice mold or mildew forming on your jet ski or ATV cover, or any other vehicle cover, you need to address the problem urgently. If there is no mold or mildew remover available to you, your best solution is to scrub the affected areas using the method in the previous section. You could also try using white vinegar to help remove the mold. After rinsing, drying the cover in direct sunlight could help eliminate any remaining spores.

Mold and mildew can harm your jet ski cover by:

• Causing stains
• Degrading the material
• Reducing the effectiveness of water resistance or UV protection
• Leading to health risks

With the ongoing exposure of jet skis to water, even the best waterproof vehicle covers are particularly at risk from mold and mildew. Knowing how to clean a jet ski cover and washing regularly will help to prevent it from forming.

Pressure Washing A Skidoo Cover

Pressure washers can be another good solution for how to clean jet ski covers, but you need to be cautious. The intensity of the high pressure could be enough to damage the fabric, so a few precautions are advised. You will need a pressure washer with adjustable pressure settings and a wide-angle spray nozzle. Some mild detergent and a soft-bristled brush will also be useful.

1. Lay the jet ski cover on a flat, clean surface with the outside facing up. Mix your mild detergent in cool water and brush it over the surface.
2. Apply the wide-angle spray nozzle to your pressure washer and test the pressure on a small, inconspicuous part of the cover to adjust the setting.
3. Spray from a safe distance - try a couple of feet away to help prevent any damage to the cover.
4. Use gentle, sweeping motions and remove all detergent from the cover.
5. Hang the cover up to air dry.

Pressure washing is an efficient cleaning method, but it does pose the risk of damage. Some will argue that it is not necessary as the first two methods described in this post are sufficient. If you choose to use a pressure washer, approach with caution.

Using Bleach For Deep Cleaning

Bleach is another option to consider for how to clean a jet ski cover when it needs a deeper clean. If you have issues like mold or mildew, bleach can be a good solution to remove the stains and eliminate any remaining spores. But bleach is a corrosive agent and it can be harmful to your cover’s fabric. Read the care instructions very closely to see if bleach can be used.

Bleach should always be a measure of last resort for if severe mold, mildew or staining occurs. Here are some basic advisory guidelines:

• Dilute the bleach with water. Consider a ratio of approximately one part bleach to ten parts water.
• Test it on a small area.
• Don’t allow the bleach to stay on the fabric for long.
• Rinse thoroughly.
• Apply a solution of water mixed with white vinegar afterwards to neutralize the bleach.

We do not recommend using bleach on our covers. Regular cleaning is the key to preventing serious issues with mold and staining. Bleach is likely to do more harm than good.

Once you have finished scrubbing and cleaning your jet ski cover, it's essential to rinse it thoroughly. Any residual detergent or other chemicals left on the fabric can lead to stains, and in more severe cases, they might even damage the fabric or any protective finishes it has. To prevent this, a comprehensive rinse with clean water using a hose or a second rinse cycle in the washing machine will effectively remove any lingering detergent.

After the rinse, inspect the cover for any stubborn stains that haven't washed out. If you discover persistent stains, you can attempt spot cleaning using either detergent or white vinegar. Another option for how to wash vehicle covers with stubborn stains is to look for professional cleaning services. In some instances, a stain might not completely vanish, but the cover can still be functional as long as you don't mind the presence of the stain.

Air drying is the optimal method for drying your vehicle cover, typically the final step in how to clean a jet ski cover. This approach allows moisture to naturally evaporate from the fabric without subjecting it to high temperatures. While it may not be the quickest way to dry your cover, it is the safest.

A gentle spin cycle in a washing machine is generally acceptable, but tumble dryers are not recommended. The high temperatures associated with tumble dryers could potentially melt or damage the materials that comprise your cover. Preserving the fabric's integrity is crucial when maintaining any type of vehicle cover, so it's advisable to always air dry it in a well-ventilated area, preferably shielded from direct sunlight.

Regular washing of your jet ski cover should be done every 1-2 months, depending on exposure to dirt and moisture. Cleaning more frequently could potentially cause problems with your cover, as materials like polypropylene, satin, and others can be sensitive to over-washing. Potential risks include:

• Color fading.
• Damage like wear or tears to the fabric.
• Compromised water resistance.
• Diminished UV protection.
• Reduced overall lifespan.

To avoid these issues, follow the manufacturer’s cleaning recommendations. We provide comprehensive guidance on maintaining our jet ski covers, so refer to those instructions for the best results.

A jet ski cover is a very worthwhile investment for maintaining the appearance and condition of your jet ski. But it is absolutely crucial to take care of your cover in order to preserve its effectiveness. If you don’t learn how to clean your jet ski cover and do so regularly, you could experience the following issues:

• It may become less effective at shielding your jet ski from external threats.
• Mold and mildew might start to appear.
• The lifespan of the cover may decrease, forcing you to replace it sooner than expected.

Cleaning your jet ski cover isn’t a complicated or time-consuming process. But it is important to do, so commit to doing it at regular intervals.

While jet skis are built to withstand exposure to water during use, long-term exposure to moisture can lead to problems. Common threats include corrosion, mold and mildew, and damage to electrical components. Ice and snow, dust and debris, and UV light are also environmental factors that can harm your jet ski over time, whether it's stored indoors or outdoors.

Our polypropylene or satin jet ski covers are designed to protect against these threats for both indoor and outdoor storage. They offer the following features:

• Waterproof
• UV-resistant
• Breathable
• Robust and durable

In essence, they act as a barrier against all environmental factors that could impact your jet ski's appearance and integrity. If you seek maximum longevity for your jet ski, you will invest in a high-quality cover and learn how to clean it.

It's advisable to cover your jet ski when it's not in use. However, it's important to note that a cover should not be applied to a wet vehicle, so ensuring the area to be covered is dry is wise. If your jet ski will be out of use for less than 24 hours, covering may not be necessary. But for longer periods of storage, covering is recommended to provide protection against:

• Precipitation
• Humidity
• UV damage
• Dust and dirt penetration

Knowing how to clean a jet ski cover and doing so every 1-2 months is the best way to maximize your cover’s durability. You should also inspect it frequently for signs of wear and tear and address those issues as soon as they appear. A deeper clean once or twice a year is sometimes recommended, and always rinse thoroughly and air dry.

When your cover is not in use, it should be stored in a clean container and placed in a cool, dry area away from direct sunlight. It is important to know how to fold your cover properly as an additional measure to help preserve its condition while in storage.